Omron E3X-DA-N series - Setting Functions in SET Mode; All Models: Sensing and Timer Settings; All Models: Monitor and Display Settings

E3X-DA-N
Setting Functions in SET Mode4
2 s
2 s
2 s
2 s
2 s
2 s
Teaching
Sensing function Displayed as "F."
Standard
(factory-set)
Super-high speed
Super-long distance
OFF
(Factory-set)
Peak
Bottom
Timer function Displayed as "t."
0
(Factory-set)
200
Flashing setting Displayed as "L."
OFF
(Factory-set)
ON
Hold setting Displayed as "H."
Display orientation setting Reversing display
Standard
(factory-set)
Reverse
Digital incident level display
Setting upper limit
for monitoring
Alternates between
"A-UP" and setting value.
(Factory setting)
Setting lower limit
for monitoring
Alternates between
"A-LO" and setting value.
(Factory setting)
Available with: E3X-DA21-N
E3X-DA51-N
E3X-DA7
E3X-DA9
Set mode selector
to SET.
Monitor Focus
B
Adjustable in 1-ms units
for 0 to 20 ms and in 5-ms
units for 25 ms or higher.
A
B A
Note: It is not possible to set an upper limit
that is lower than the lower limit.
Note: It is not possible to set an lower limit
that is lower than the lower limit.
TEACH
MODE
TEACH
TEACH
TEACH
TEACH
TEACH
TEACH
TEACH
TEACH
TEACH
TEACH
TEACH
TEACH
MODE
MODE
MODE
MODE
TEACH
TEACH
MODE
SET
MODE
TEACH
TEACH
TEACH
TEACH
TEACH
Alternates
Alternates
Alternates
Alternates
Alternates
In units of
100 from 0
In units of 100
from 4,000.
Alternates
Alternates
Alternates
Four types of sensitivity settings are available. Refer to page 22
for details.
http://www.ia.omron.com/
20
(c)Copyright OMRON Corporation 2007 All Rights Reserved.