Omron E3X-DA-N series - Ratings and Specifications (Connected); Environmental and Electrical Specs; Connector and Console Specs

E3X-DA-N
Amplifiers with Connectors
(Specifications different to those for Pre-wired Amplifiers)
* The dielectric strength for water-resistant models is 500 VAC at 50/60 Hz for 1 min.
Ambient temperature
Operating:Groups of 1 to 3 Amplifiers: −25 to 55°C
Groups of 4 to 11 Amplifiers: −25 to 50°C
Groups of 12 to 16 Amplifiers: −25 to 45°C
Storage:−30 to 70°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min
Vibration resistance
(destruction)
10 to 55 Hz with a 1.5-mm double amplitude for 2 h each in X, Y and Z directions
Shock resistance
(destruction)
500m/s
2
, for 3 times each in X, Y and Z directions
Degree of protection IEC IP50 (with Protective Cover attached)
IEC IP66 (with
Protective
Cover
attached)
IEC IP50 (with
Protective
Cover
attached)
Connection method Pre-wired (standard cable length: 2 m)
Weight (packed state) Approx. 100 g Approx. 110 g Approx. 100 g
Materi-
al
Case Polybutylene terephthalate (PBT)
Cover Polycarbonate
Polyethersulfo
ne
Accessories Instruction sheet
Type
Standard
models
Monitor-out-
put models
Mark-detecting models
Infrared
models
Water-
resistant
models*
Twin-output
models
Output
type
NPN
output
E3X-DA6 E3X-DA7 E3X-DAB6 E3X-DAG6 E3X-DAH6
E3X
-DA14V
E3X
-DA6TW
Item
PNP
output
E3X-DA8 E3X-DA9 E3X-DAB8 E3X-DAG8 E3X-DAH8
E3X
-DA44V
E3X
-DA8TW
Connection method Standard connector M8 connector
Standard
connector
Weight (packed state) Approx. 55 g Approx. 65 g Approx. 55 g
Type
Standard
models
Monitor-
output
models
Mark-detecting models
Infrared
models
Water-
resistant
models
Twin-output
models
Output
type
NPN
output
E3X
-DA11-N
E3X
-DA21-N
E3X
-DAB11-N
E3X
-DAG11-N
E3X
-DAH11-N
E3X
-DA11V
E3X
-DA11TW
Item
PNP
output
E3X
-DA41-N
E3X
-DA51-N
E3X
-DAB41-N
E3X
-DAG41-N
E3X
-DAH41-N
E3X
-DA41V
E3X
-DA41TW
Connectors
Item
Model
E3X-CN11/21/22 E3X-CN12
Rated current
2.5 A
Rated voltage
50 V
Contact resistance
20 mΩ max. (20 mVDC max., 100 mA max.)
The figure is for connection to the Amplifier and the adjacent
Connector. It does not include the conductor resistance of the cable.
No. of insertions
(durability)
50 times
The figure for the number of insertions is for connection to the
Amplifier and the adjacent Connector.
Material
Housing Polybutylene terephthalate (PBT)
Contacts Phosphor bronze/gold-plated nickel
Weight (packed state) Approx. 55 g Approx. 25 g
Mobile Console
Item
Model
E3X-MC11
Power supply
voltage
Charged with AC
adapter
Connection
method
Connected via adapter
Weight
(packed state)
Approx. 580 g
(Console only: 120 g)
Refer to Instruction Manual provided
with the Mobile Console for details.
http://www.ia.omron.com/
7
(c)Copyright OMRON Corporation 2007 All Rights Reserved.