Omron E5AC-T User Manual

6 Parameters
6 - 34
E5@C-T Digital Temperature Controllers User’s Manual (H185)
wt-b
Wait Band
• This parameter sets the band for the wait operation as a deviation from the SP.
• The wait operation is not performed if the wait band is set to 0.
z Related Parameters
5-15 Program-related Functions (page 5-53)
stb
Standby Time
• This parameter is used to set the time from when the run command is executed until the
program starts operation.
* The unit is set in the Standby Time Unit parameter. (The default is H-M (hours and minutes).)
z Related Sections
5-15 Program-related Functions (page 5-53)
z Related Parameters
Standby Time Unit (Advanced Function Setting Level): Page 6-82
Function
Setting
Setting range Unit Default
Temperature input: OFF, or 0.1 to 999.9 °C or °F off
Analog input: OFF, or 0.01 to 99.99 %FS
See
See
Function
Setting
Setting range Unit Default
0.00 to 99.59 (hours.minutes)
0.00 to 99.23 (days.hours)
Hours and minutes, or
days and hours*
0.00
See
See

Omron E5AC-T Specifications

General

Brand	Omron
Model	E5AC-T
Category	Temperature Controller
Language	English