Omron E5AN-H

331
Appendix
Dead Band ● (See
note 15.)
--- --- --- --- --- --- --- --- ---
Hysteresis (Heating) ● (See
note 15.)
--- --- --- --- --- --- --- --- ---
Hysteresis (Cooling) ● (See
note 15.)
--- --- --- --- --- --- --- --- ---
Wait Band ● (See
note 15.)
--- --- --- --- --- --- --- --- ---
Alarm 1 to 3 Hysteresis ● (See
note 15.)
--- --- --- --- --- --- --- --- ---
ST Stable Range ● (See
note 15.)
--- --- --- --- --- --- --- --- ---
AT H ys te res is ● (See
notes 15
and 20.)
● (See
note 20.)
--- --- --- --- --- --- --- ---
PV Stable Band ● (See
note 15.)
--- --- --- --- --- --- --- --- ---
LBA Level ● (See
note 15.)
--- --- --- --- --- --- --- --- ---
LBA Band ● (See
note 15.)
--- --- --- --- --- --- --- --- ---
Bank 1 to 7 SP ● (See
note 3.)
● (See
note 3.)
● (See
note 3.)
● (See
note 3.)
--- --- --- --- --- ---
Bank 0 to 7 Wait Band ● (See
note 15.)
--- --- --- --- --- --- --- --- ---
PID 1 to 8 Proportional Band
(See note 16.)
● (See
notes 4
and 15.)
--- --- --- --- --- --- --- --- ---
PID 1 to 8 Integral Time (See note 16.) ● (See
notes 4
and 15.)
--- --- --- --- --- --- --- --- ---
PID 1 to 8 Derivative Time
(See note 16.)
● (See
notes 4
and 15.)
--- --- --- --- --- --- --- --- ---
PID 1 to 8 MV Upper Limit,
PID 1 to 8 MV Lower Limit
--- --- --- --- --- ● (See
note 6.)
--- --- --- ---
PID 1 to 8 Automatic Selection Range
Upper Limit
● (See
note 14.)
● (See
note 14.)
--- --- --- --- --- --- --- ---
Changed
parameter
Related initialized parameters
Input
type
Tempera
ture unit
Scaling
Lower
Limit
Scaling
Upper
Limit
SP
Lower
Limit
SP
Upper
Limit
PID/ON
OFF
Stan-
dard or
Heating/
Cooling
Pro-
gram
Pattern
Valid
Program
Bank
ST Remote
SP
Enable
Related parameter initialization
execution condition
--- Temper-
ature
input
Analog
input
--- Standar
d
models
Stan-
dard
models
--- (See
note 21.)
--- ---