Omron FQ2-S Series - Page 157

Outputting Data and Controlling Operation through PROFINET
FQ2-S/CH User’s Manual
for Communications Settings
155
3
Controlling Operation and Outputting Data with an
Ethernet Connection
If measurements are executed in parallel, the PROFINET BUSY signal will also turn ON.
• Input Area (Output Area)
The Input Area (output area) is assigned immediately after the Input Area (response area) in I/O memory.
Command code Command code This I/O port returns the command code that was exe-
cuted.
Command/
response com-
munications
Response code Response code This I/O port contains the response code of the executed
command.
Response data Response data This I/O port contains the response data of the executed
command.
Input Area
(Output Area)
Bits Description
7 6 5 4 3 2 1 0
+16 Output data 1 Output data 0 (32 bits)
+17
+18
+19
·
·
·
·
·
·
·
·
·
+44 Output data 8 Output data 7 (32 bits)
+45
+46
+47
·
·
·
·
·
·
·
·
·
+76 Output data 16 Output data 15 (32 bits)
+77
+78
+79
·
·
·
·
·
·
·
·
·
+140 Output data 32 Output data 31 (32 bits)
+141
+142
+143
·
·
·
·
·
·
·
·
·
Signal Signal name Function Application
method
Important
FQ2-S_CH_comm.book 155 ページ ２０１４年６月２６日 木曜日 午前１１時４７分