Omron FQ2-S Series User Manual

Command Control
272
FQ2-S/CH User’s Manual
for Communications Settings
RESET
Resets the Sensor
This command resets the Sensor.
<Command Format>
<Response Format>
When the Command Is Processed Normally
If process is completed normally, the Sensor is restarted. There is therefore no response.
When the Command Is Not Processed Normally
TEACH
Perform Teaching
This command performs teaching for all of the registered items and image adjustment items.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
RE CR SET
Command
Delimiter
CR ER
Delimiter
TE CR ACH
Command
Delimiter
CR OK
Delimiter
CR ER
Delimiter
FQ2-S_CH_comm.book 272 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English