Command Control
FQ2-S/CH User’s Manual
for Communications Settings
273
5
Appendices
TIMER or TMR
This command executes the specified command after the specified waiting time elapses.
<Command Format>
or
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Waiting time (msec) Specifies the waiting time for the command that will be executed with this command. (100 to
99,999)
Command string Specifies the string for the command that will be executed with this command.
Only one type of command can be specified for execution with this command.
This timer command cannot be specified.
TIMER
Space (0x20)Space (0x20)
C
R
Command string
Waiting time (msec)
TMR
Waiting time (msec)
C
R
Command string
Space (0x20)
Space
(0x20)
CR
OK
Delimiter
FQ2-S_CH_comm.book 273 ページ ２０１４年６月２６日 木曜日 午前１１時４７分
To Next Page
Loading...
