Command Control
FQ2-S/CH User’s Manual
for Communications Settings
275
5
Appendices
UPDATEREFPOS or URP
Re-register Reference Values (Position Compensation Item)
This command re-registers the reference value for the specified position compensation item based on the
previously loaded image.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Position compensation
item number
Specifies the item number of the position compensation item that will have its reference
values re-registered. (0 to 7)
UP
CR
DATERE OSFP
or
Position compensation
item number (1 digit max.)
Delimiter
Delimiter
CR
URP
Position compensation
item number (1 digit max.)
Space
(0x20)
Space
(0x20)
FQ2-S_CH_comm.book 275 ページ ２０１４年６月２６日 木曜日 午前１１時４７分
To Next Page
Loading...
