Omron FQ2-S Series - Page 278

Command Control
276
FQ2-S/CH User’s Manual
for Communications Settings
Commands to Get Status
SCENE or S
Acquire Scene Number
This command acquires the scene number currently being used.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Example:
When Scene 0 Is Being Used
<Command>
<Response>
Scene number The acquired scene number (currently used scene number) is returned.
SC CR E N E
Delimiter
CR S
Delimiter
or
CR
CR
OK
Delimiter
Delimiter
Scene number
(2 digits max.)
CR ER
Delimiter
SC CR E N E
0 CR
KO CR
FQ2-S_CH_comm.book 276 ページ ２０１４年６月２６日 木曜日 午前１１時４７分