Omron FQ2-S Series User Manual

Control Methods Using an External Device
26
FQ2-S/CH User’s Manual
for Communications Settings
EtherNet/IP, PROFINET
The output data that is assigned is output to the output area as shown below.
Output data that exceeds the size (e.g., 256 bytes) that is set for the output data size parameter is separated
over more than one cycle.
To ensure that no data is lost when receiving data that is divided and output over several cycles, use the
handshake function.
Data Output Control with Handshaking: p.30
*1: At the first data output, a GATE (Data Output Completion) signal is output.
*2: If the size of the specified output data exceeds the set value of the output data size setting, the data is output separately as shown below.
+0
Output data Assigned output data
+1
Output data 0
(4 bytes)
Output data 1
(4 bytes)
Output data 2
(4 bytes)
Output data 31
(4 bytes)
Output data 32
(4 bytes)
Output data 61
(4 bytes)
Output data 62
(4 bytes)
Output data 63
(4 bytes)
Output data 0
(4 bytes)
Output data 6
(4 bytes)
Output data 7
(4 bytes)
Inspection item 0: Position X for Search
+2
+3
Inspection item 0: Position Y for Search
+4
+5
Inspection item 1: Position X 1st point for Shape Search II
+62
+63
Inspection item 1: Position X 30th point for Shape Search II
+64
+65
Inspection item 1: Position Y 1st point for Shape Search II
+122
+123
Inspection item 1: Position Y 30th point for Shape Search II
+124
+125
Inspection item 2: Position X 1st point for Shape Search II
+126
+127
Inspection item 2: Position Y 1st point for Shape Search II
+0
+1
Inspection item 2: Position X 2nd point for Shape Search II
+12
+13
Inspection item 2: Position X 10th point for Shape Search II
+14
+15
Inspection item 2: Position Y 10th point for Shape Search II
Offset from first
address in output area
256 bytes
(Data that is
output the
first cycle.
*1
)
72 bytes
(Data that
is output
the second
cycle.
*2
)
Output data size setting: 256 bytes
First Data Output
Second Data Output
Output data 0 Output data 0
Output data 7
Output data 63
256
bytes
72 bytes
The previous data will be
overwritten. Adjust the
timing with handshaking to
get the data.
Zeros are written to
unused bytes.
FQ2-S_CH_comm.book 26 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English