Command Control
FQ2-S/CH User’s Manual
for Communications Settings
295
5
Appendices
OUTPUTTRANSSTATE or OTS
Acquire Communication Output Status
This command acquires the output status (allowed/prohibited) for all the communications protocol set with the
Set Communication Output Status command.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Acquired value Returns the acquired communications protocol status.
0: Output prohibited status
1: Output allowed status
OU TTRA
CR
PT
S
U N TATESS
Command
Delimiter
Delimiter
Command
or
TO
CR
CR
Acquired
value
Delimiter
CR
OK
FQ2-S_CH_comm.book 295 ページ ２０１４年６月２６日 木曜日 午前１１時４７分
To Next Page
Loading...
