Omron FQ2-S Series User Manual

Command Control
314
FQ2-S/CH User’s Manual
for Communications Settings
SETPOSFIGPARAM or SPFP
Set Measurement Region/Model Region for an Image Adjustment Item (Filter Item/Position Compensation
Item)
This command changes the range set as the measurement region or the model registration region for an image
adjustment item (filter item/position compensation item).
This command cannot set a new measurement region or model registration region.
When using this command, execute it for an inspection item that has already been set with a measurement
region or a model registration region.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
Figure
number
(1 digit)
Command
Space
(0x20)
Space
(0x20)
Region
number
(1 digit)
Space
(0x20)
Image adjustment item
(filter item/position
compensation item)
number (1 digit)
Space
(0x20)
Space
(0x20)
Space
(0x20)
Space
(0x20)
Image adjustment item
(filter item/position
compensation item)
number (1 digit)
Command
or
Region
number
(1 digit)
Figure
number
(1 digit)
Delimiter
Delimiter
Space
(0x20)
Space
(0x20)
Space
(0x20)
Parameter 1
Parameter 2
Parameter 21
Parameter 1 Parameter 21
Parameter 2
SE F IGPARAM
CR
TP SO
PSPF
CR
...
...
Delimiter
CR OK
CR ER
Delimiter
FQ2-S_CH_comm.book 314 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English