Omron FQ2-S Series - Page 332

Command Control
330
FQ2-S/CH User’s Manual
for Communications Settings
SGRLOAD
This command loads all scene data that is stored on the SD card inserted in the Touch Finder.
The source for all scene data is the following fixed directory on the SD card.
\Sensor name\SGP
<Command format>
<Response format>
When Processing Is Performed Normally
When Processing Is Not Performed Normally
<Parameter Descriptions>
Do not turn off power to the Vision Sensor until there is a response.
All scene data file name Specifies the all scene data file name to be loaded. (64 characters max.)
The file name extension (.sgp) can be omitted.
Only files that have an "SGP" extension can be read.
SGRLOAD
C
R
All scene data file nameSpace (0x20)
Important
FQ2-S_CH_comm.book 330 ページ ２０１４年６月２６日 木曜日 午前１１時４７分