Omron FQ2-S Series User Manual

Command Control
334
FQ2-S/CH User’s Manual
for Communications Settings
CGRLOAD
This command loads all calibration data that is stored on the SD card inserted in the Touch Finder.
The source for all calibration data is the following fixed directory on the SD card.
\Sensor name\CGP
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Do not turn off power to the Vision Sensor until there is a response.
All calibration data file
name
Specifies the all calibration data file name to be loaded. (64 characters max.)
The file name extension (.cgp) can be omitted.
Only files with the extension “CGP” can be loaded.
CGRLOAD
C
R
All calibration data file name
Space (0x20)
Delimiter
CR OK
CR ER
Delimiter
Important
FQ2-S_CH_comm.book 334 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English