Command Control
FQ2-S/CH User’s Manual
for Communications Settings
335
5
Appendices
DICLOAD
This command loads model dictionary data that is stored on the SD card inserted in the Touch Finder as the
model dictionary with the specified number.
The source for model dictionary data is the following fixed directory on the SD card.
\Sensor name\DIC
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Do not turn off power to the Vision Sensor until there is a response.
Model dictionary data
number
Specifies the model dictionary data number you want to load. (0 to 31)
Model dictionary data
file name
Specifies the model dictionary data file name you want to load. (64 characters max.)
The file name extension (.dic) can be omitted.
DICLOAD
C
R
Model dictionary data file name
Model dictionary data number (2 digits max.)
Space (0x20)Space (0x20)
FQ2-S_CH_comm.book 335 ページ ２０１４年６月２６日 木曜日 午前１１時４７分
To Next Page
Loading...
