Command Control
336
FQ2-S/CH User’s Manual
for Communications Settings
DGRLOAD
This command loads all model dictionary data that is stored on the SD card inserted in the Touch Finder.
The source for all model dictionary data is the following fixed directory on the SD card.
\Sensor name\DGP
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Do not turn off power to the Vision Sensor until there is a response.
All model dictionary
data file name
Specifies the all model dictionary data file name to be loaded. (64 characters max.)
The file name extension (.dgp) can be omitted.
Only files with the extension “DGP” can be loaded.
DGRLOAD
C
R
All model dictionary data file name
Space (0x20)
FQ2-S_CH_comm.book 336 ページ ２０１４年６月２６日 木曜日 午前１１時４７分
To Next Page
Loading...
