Omron FQ2-S Series - Page 340

Command Control
338
FQ2-S/CH User’s Manual
for Communications Settings
SGRSAVE
This command saves all scene data as a file to the SD card inserted in the Touch Finder.
The destination for all scene data is the following fixed directory on the SD card.
\Sensor name\SGP
<Command format>
<Response format>
When Processing Is Performed Normally
When Processing Is Not Performed Normally
<Parameter Descriptions>
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Vision Sensor until there is a response.
All scene data file name Specifies the all scene data file name to be saved. (64 characters max.)
The file name extension (.sgp) can be omitted.
SGRSAVE
C
R
All scene data file name
Space (0x20)
Important
FQ2-S_CH_comm.book 338 ページ ２０１４年６月２６日 木曜日 午前１１時４７分