Omron FQ2-S Series User Manual

Command Control
FQ2-S/CH User’s Manual
for Communications Settings
343
5
Appendices
CLBSAVE
This command saves the calibration data with the specified calibration number as a file to the SD card inserted
in the Touch Finder.
The destination for calibration data is the following fixed directory on the SD card.
\Sensor name\CLB
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Vision Sensor until there is a response.
CGRSAVE
Saves all calibration data as a file to the SD card inserted in the Touch Finder.
The destination for all calibration data is the following fixed directory on the SD card.
\Sensor name\CGP
<Command Format>
Scene number Specifies the scene number (0 to 31) to be saved.
Calibration data file
name
Specifies the file name when saving.
The file name extension (.clb) can be omitted.
CLBSAV E
Space (0x20)Space (0x20)
C
R
Calibration data file name
Scene number (2 digits max.)
Delimiter
CR OK
CR ER
Delimiter
Important
CGRSAV E
C
R
All calibration data file name
Space (0x20)
FQ2-S_CH_comm.book 343 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English