Omron FQ2-S Series User Manual

Command Control
FQ2-S/CH User’s Manual
for Communications Settings
345
5
Appendices
DGRSAVE
Saves all model dictionary data as a file to the SD card inserted in the Touch Finder.
The destination for all model dictionary data is the following fixed directory on the SD card.
\Sensor name\DGP
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Vision Sensor until there is a response.
All model dictionary
data file name
Specifies the all model dictionary data file name to save. (64 characters max.)
The file name extension (.dgp) can be omitted.
DGRSAV E
C
R
All model dictionary data file name
Space (0x20)
Important
FQ2-S_CH_comm.book 345 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English