Omron FQ2-S Series - Page 354

Command Control
352
FQ2-S/CH User’s Manual
for Communications Settings
<Confirmation command response format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Execution command format>
Loads system data in binary data format.
<Execution command response format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
PREBKDLOADB (Check) / BKDLOADB (Execute)
Loading all setting data for the Sensor (binary data)
The Sensor loads all setting data (all scene data, system data, calibration group data) for the Sensor saved as
a backup file.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 183.
File size scheduled to be sent Number of bytes of system data scheduled to be sent (integer type)
System data (binary) System data to be loaded (binary data)
Delimiter
CR OK
CR ER
Delimiter
LOADB CR SSY
System data (binary)
Space
(0x20)
Delimiter
Delimiter
CR OK
CR ER
Delimiter
FQ2-S_CH_comm.book 352 ページ ２０１４年６月２６日 木曜日 午前１１時４７分