Command Control
362
FQ2-S/CH User’s Manual
for Communications Settings
<Confirmation command response format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Execution command format>
This command outputs system data in binary data format.
<Execution command response format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
System data size Number of bytes of system data to output (integer type)
System data (binary) System data to output (binary data)
System data size
Delimiter
CR
OK
CR
Delimiter
System data (binary)
Delimiter
CR
OK
CR
Delimiter
FQ2-S_CH_comm.book 362 ページ 2014年6月26日 木曜日 午前11時47分