Omron FQ2-S Series User Manual

Command Control
FQ2-S/CH User’s Manual
for Communications Settings
363
5
Appendices
PREBKDSAVEB (Check) / BKDSAVEB (Execute)
Outputting system data and all scene data (binary data)
This command outputs all setting data (all scene data, system data, calibration group data) for the Sensor as a
backup file in binary data format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 183.
<Confirmation command format>
Before all setting data being used by the current Sensor is output in binary data format, a check is performed to
determine if the data can be received by the external device that will receive the data.
<Confirmation command response format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Execution command format>
This command outputs all setting data being used by the current Sensor in binary data format.
<Execution command response format>
When the Command Is Processed Normally
PR SAVEB CR EB DK
Delimiter
BKD data size
Delimiter
CR OK
CR
Delimiter
CR ER
Delimiter
SAVEB CR BDK
Delimiter
BKD data (binary)
Delimiter
CR OK
CR
Delimiter
FQ2-S_CH_comm.book 363 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English