Omron FQ2-S Series - Page 366

Command Control
364
FQ2-S/CH User’s Manual
for Communications Settings
When the Command Is Not Processed Normally
<Parameter Descriptions>
PREIMAGESAVEB (Check) / IMAGESAVEB (Execute)
Outputting image (binary data)
This command outputs images stored in the Sensor memory in binary format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 183.
<Confirmation command format>
Before images saved to the Sensor’s memory are output in binary data format, a check is performed to
determine if the data can be received by the external device that will receive the data.
<Confirmation command response format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Execution command format>
Outputs image data stored in the Sensor memory in binary format.
BKD data size Number of bytes of all setting data to output (integer type)
BKD data (binary) All setting data to output (binary data)
CR ER
Delimiter
PR GESAVEB CR EI AM
Image data number
Space
(0x20)
Delimiter
Image data size
Delimiter
CR OK
CR
Delimiter
CR ER
Delimiter
SAVEB CR IAGEM
Delimiter
FQ2-S_CH_comm.book 364 ページ ２０１４年６月２６日 木曜日 午前１１時４７分