Omron FQ2-S Series - Page 369

Command Control
FQ2-S/CH User’s Manual
for Communications Settings
367
5
Appendices
<Confirmation command response format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Execution command format>
This command outputs the calibration data in binary data format.
<Execution command response format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Calibration data number Specifies the calibration number (integer type) you want to output.
Specify 0 to 31.
Calibration data size Number of bytes of calibration data to output (integer type)
Calibration data (binary) Calibration data to output (binary data)
CR
Calibration data size
Delimiter
CR OK
Delimiter
CR ER
Delimiter
SAV EB CR CBL
Delimiter
Calibration data (binary)
Delimiter
CR OK
CR
Delimiter
CR ER
Delimiter
FQ2-S_CH_comm.book 367 ページ ２０１４年６月２６日 木曜日 午前１１時４７分