Omron FQ2-S Series - Page 393

Command Control
FQ2-S/CH User’s Manual
for Communications Settings
391
5
Appendices
● Change Scene Number: 280F 00301000
This command changes the scene number to use.
Format
Response Format
End Codes
Parameter Descriptions
MRC
(1 byte)
SRC
(1 byte)
Vision Sensor command code
(4 bytes)
Scene number (4 bytes)
28 0F 00301000 Scene number to change to
(2 digits max.)
MRC
(1 byte)
SRC
(1 byte)
MRES
(1 byte)
SRES
(1 byte)
Vision Sensor command code
(4 bytes)
28 0F End code 00301000
End code (hex) Meaning
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Scene number Specifies the scene number (0 to 31) to change to.
FQ2-S_CH_comm.book 391 ページ ２０１４年６月２６日 木曜日 午前１１時４７分