Omron FQ2-S Series - Page 395

Command Control
FQ2-S/CH User’s Manual
for Communications Settings
393
5
Appendices
● Set Communication Output Status: 280F 00307020
This command sets the output status (allowed/prohibited) for all the communications protocol.
Communications protocols with the output status set to prohibited will no longer output signals after being set
as such.
Command Format
Response Format
End Codes
Parameter Descriptions
MRC
(1 byte)
SRC
(1 byte)
Vision Sensor command code
(4 bytes)
Communications protocol status
to be set (4 bytes)
28 0F 00307020 Communications protocol status
to be set (1 digit max.)
MRC
(1 byte)
SRC
(1 byte)
MRES
(1 byte)
SRES
(1 byte)
Vision Sensor command code
(4 bytes)
28 0F End code 00307020
End code (hex) Description
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Communications proto-
col status to be set
Specifies the communications protocol status to be set.
0: Output prohibited status
1: Output allowed status
FQ2-S_CH_comm.book 393 ページ ２０１４年６月２６日 木曜日 午前１１時４７分