Omron G5 Series Startup Guide

14
Initial Settings of the Controller 6.2.2.
Configure the initial settings for the Controller.
Precautions for Correct Use
Configuring the initial settings clears all data in the Controller memory. Back up necessary
data in advance.
1
In the Terminal tab page, type
the $$$*** command to reset the
Controller to factory default.
2
Select System – CPU – System
in the Solution Explorer.
3
Select Global Clock.

Omron G5 Series Specifications

General

Feedback	Incremental Encoder, Absolute Encoder
Communication	EtherCAT
Safety Function	STO (Safe Torque Off)
Protection Functions	Overvoltage, Undervoltage, Overcurrent
Vibration Resistance	4.9 m/s² (10 to 55 Hz)