A
Allen AtkinsonSep 9, 2025
Why is my Omron HBF-255T measurement result inaccurate?
- KKeith Gregory DDSSep 9, 2025
To ensure accurate measurements with your Omron Personal Care Products device, take measurements on a hard and level floor.
To Next PageTo Next PageWhy is my Omron HBF-255T measurement result inaccurate?
To ensure accurate measurements with your Omron Personal Care Products device, take measurements on a hard and level floor.
What does blank display mean on Omron HBF-255T Personal Care Products?
If your Omron Personal Care Products device displays " " for some results, check whether the settings of birth date, gender, and height are correct. Even if these settings are correct, " " is displayed if they are out of the displayable or supported age range.
What to do if Omron HBF-255T shows communication failure?
If your Omron Personal Care Products device shows a communication failure, turn off the power and attempt the communication again. If the error persists, contact the OMRON service representative.
Why does Omron Personal Care Products only show weight and BMI?
If your Omron Personal Care Products device displays only weight and BMI, and you are below 18 years old, note that visceral fat level and body age cannot be measured.
What to do if soles are not in firm contact with Omron HBF-255T Personal Care Products electrodes?
To fix the issue of soles not firmly contacting the electrodes on your Omron Personal Care Products device, make sure you are standing correctly with your soles firmly placed on the electrodes during measurement.
Why is my Omron HBF-255T Personal Care Products not turning on?
If your Omron Personal Care Products device displays nothing, replace all four batteries with new ones.
Why is the symbol blinking on my Omron HBF-255T when deleting communication settings?
If your Omron Personal Care Products device displays the symbol because you pressed and held the and OFF button for more than 2 seconds while the Bluetooth symbol was blinking, this indicates that you are deleting the communication setting. Press the OFF button to stop the operation.
Why is the symbol blinking on my Omron Personal Care Products device during data transfer?
If your Omron Personal Care Products device displays the symbol because you pressed the button, this indicates that data is being transferred to your smart device. Follow the instructions on the "OMRON connect" app. Press the OFF button to stop the transmission.
Why is the symbol blinking on my Omron HBF-255T Personal Care Products device when pairing?
If your Omron Personal Care Products device displays the symbol because you pressed and held the button for more than 2 seconds, this indicates that you are pairing your unit with your smart device. Follow the instructions on the "OMRON connect" app. Press the OFF button to stop the pairing.
Why is the symbol blinking on my Omron HBF-255T when it stores measurements?
If your Omron Personal Care Products device displays the symbol, it means that 30 sets of measurement results have been stored. If the number exceeds 30, the oldest results are deleted. Transfer the measurement results to the "OMRON connect" app, and the symbol will disappear.
General| Type | Body Composition Monitor |
|---|---|
| Product Name | Omron HBF-255T |
| Category | Personal Care Products |
| Weight Capacity | 330 lbs |
| Weight Capacity (lbs) | 330 |
| User Memory | 4 Users |
| Display | LCD |
| Batteries Included | Yes |
| Increments | 0.2 lbs |
| Measurement Method | Bioelectrical Impedance Analysis (BIA) |
| Measurement Parameters | Weight, Body Fat Percentage, Visceral Fat Level, Skeletal Muscle Percentage, Resting Metabolism, Body Age, BMI |
| Body Fat Percentage Range | 5% to 60% |
| Visceral Fat Level | 1 - 30 |
| Power Source | 4 x AAA batteries |
Welcomes the user and advises reading the instruction manual for safe and proper use of the device.
Provides essential safety precautions and warnings for using the body composition monitor.
Explains data transfer precautions and potential causes of incorrect measurements.
Details the main unit components and display indicators of the OMRON HBF-255T.
Explains the procedure for battery installation and replacement, including battery life.
Guides users on connecting the body composition monitor to a smart device via Bluetooth.
Instructs on setting the correct date and time on the unit, either directly or via the app.
Outlines the steps to register personal information for up to four users on the device.
Provides guidance on correct posture and preparation for accurate body composition measurements.
Details the step-by-step process of performing a body composition measurement.
Explains how to view and interpret the various measurement results displayed on the unit.
Explains how to view measurement data and trends using the connected smartphone app.
Guides users on manually selecting their personal number for measurement when auto-recognition fails.
Details how to use the unit without recording personal data or measurement results.
Explains how to use the unit solely for measuring body weight, without recording composition data.
Describes how to use the function to measure weight differences, useful for babies or pets.
Provides instructions on modifying or removing registered personal information for users.
Explains how to remove Bluetooth pairing and communication settings from the device.
Offers guidance on cleaning the unit and proper storage conditions to ensure longevity.
Lists common error displays, their causes, and corrective actions for the body composition monitor.
Explains the principle of body composition calculation and recommended measurement times.
Provides charts and guidelines for interpreting body fat, visceral fat, and skeletal muscle percentage results.
