Omron HEM-9000AI - Setting the Date and Time

19
8.General Preparation
EN
8.3. Setting the Date and Time
1. Press the F5 key on a screen where F5 [SETUP]
appears at the bottom. [Fig. 1]
2. The setup screen will be displayed.
Move the [ ] cursor in the upper-left part of the
screen up or down using the [ ] buttons to select
“DATE/TIME” from the menu column. Press the SET
button or the [ ] button to move the cursor to the
right. [Figs. 2 and 3]
[Fig. 1]
[Fig. 2]
[Fig. 3]