Omron HEM-9000AI - 11 Selecting the Measurement Method

30
11.Selecting the Measurement Method
11.Selecting the Measurement Method
11.1. Selecting the Measurement Method
This device has the following three measurement options: AI + blood pressure measurement (1.
below), blood pressure measurement (2. below), and AI measurement (3. below). Change the
measurement option by pressing the F1 key [MODE] until the desired option is selected [Figs. 29-
32].
1. Measuring both AI and blood pressure. (Refer to
Section 12.1.)
The AI and blood pressure can be measured either
automatically, alternating between the two
measurements (AI→BP measurement), or almost
simultaneously using both arms (AI+BP
simultaneous dual-arm measurement).
(Refer to Section 18.3.)
2. Measuring Blood Pressure Only. (Refer to Section
13.1.)
3. Measuring AI Only. (Refer to Section 14.1.)
[Fig. 29]
[Fig. 30]
[Fig. 31]
[Fig. 32]