Omron HEM-9000AI - Print Continuous Pulse Waves

51
16.Memory Retrieval
EN
16.5. Print Continuous Pulse Waves
To print continuous pulse waves from patient’s detailed measurement results, follow the
steps below.
Continuous pulse waves can be printed only if pulse wave data is stored.
(Refer to Section 18.7.)
1. Press the F6 key on the [-DATA DETAIL-] screen.
[Fig. 10]
At this time, “Select print contents” will be displayed.
[Fig.11]
2. Press the F3 key [CONTINUOUS PULSE WAVE].
[Fig. 11]
[Fig. 10]
F1 key CANCEL Return to the previous screen.
F2 key PRINT RESULT
Print the measurement result. (Refer to Section
15.1.)
F3 key PRINT CONTINUOUS PULSE WAVE
Print the continuous pulse wave.
[Fig. 11]