Omron NE1A-SCPU01 - 07-2009 - Total on Time Monitor Function Unit Ver. 1.0 or Later

119
Common Functions Section 7-1
Each I/O point’s accumulated contact operations count can be cleared. To
clear the count, select the contact operations count to be cleared and click the
Clear Value Button.
7-1-4 Total ON Time Monitor Function
Overview
This function can be used with Controllers with unit version 1.0 or later
(including Controllers that support EtherNet/IP). It times how long a local
input, test output, or local output is ON and stores that total ON time internally
in non-volatile memory.
• Count time: 0 to 4,294,967,295 s (stored as 00000000 to FFFFFFFF hex)
• Count units: Seconds
This information can be monitored using the Network Configurator or explicit
messaging.
Unit Ver. 1.0 or Later
Total ON time
Sensor
I/O power supply
Total ON time
Connected device