Omron NE1A-SCPU01 - 07-2009 - Indicator;Display Status and Corrective Actions for Errors

200
Command Reference: Function Blocks Section 8-5
2. Manual Reset
Decrementing counter:
Decrementing counter:
8-5-16 Multi Connector
Diagram
General Description
This function can be used with Controllers with unit version 1.0 or later
(including Controllers that support EtherNet/IP).
The Multi Connector function outputs input signals (up to 8 inputs) to output
signals (up to 8 outputs).
The input signals and output signals are associated one-to-one from number
1 to 8. The status of other input signals has no effect.
Idle to RUN
0
Input
Counter
(set value)
Count
Output
Enable
Idle to RUN
0
Input
Counter
(set value)
Count
Output
Enable
Unit Ver. 1.0 or Later
Default Maximum Number of outputs
Output1
Input1