22
Nomenclature and Functions Section 2-1
NE1A-SCPU01-EIP
Indicator areas
Node address switches
Set the DeviceNet node address
as a 2-digit decimal number.
DeviceNet communications connector
Connects to the network communications cable.
The communications power supply is also supplied from this connector.
The XW4G-05C1-H1-D Connector is provided for node connections.
Baud rate switch
Sets the DeviceNet baud rate.
EtherNet/IP
communications
connector
USB port
B connector
IP address
display switch
Indicator area
Terminal area
Terminal area
To Next Page
Loading...
