Omron NJ Series Startup Guide

5 Press the OK button.
6 Press the up or down arrow button to change the value of Approach Dist field. Y
ou can select
the height to rise and fall in the range of 1 to 200 mm.
Assume that the value of height to rise and fall is 40 in this step.
7 Press the OK button.
3 Implementation Example of Static Pick-and-place Equipment
3-84
NJ-series Robot Integrated System Startup Guide (O049)

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model