9 Select 3D CAD data to import, and then click the Open button.
In this example, you select the conveyor of MISUMI Corporation whose model number is
SVKN-100-1000-25-T100-IM-9-H-A for the Conveyor A. You can import the 3D CAD data with
the file name extension “stp”.
The Open dialog box is closed and import of 3D CAD data starts automatically.
When the import completes, the assemblies of the import 3D CAD data is displayed in the
Import CAD File wizard.
3 Implementation Example of Static Pick-and-place Equipment
3-39
NJ-series Robot Integrated System Startup Guide (O049)
3-3 Programming and Simulation Procedures
3
3-3-5 Placing 3D Shape Data
To Next Page
Loading...
