100
A-3-6 NQ with Siemens S7 (PPI) Driver and Siemens S7-200
Series PLC
To perform a successful communication proceed as follows.
1 Right-click the Nodes folder and click Add....
2 Set all data as shown in the screenshot.
3 Create PLC tag with address MW0000.
4Add a Data Entry object with tag address MW0000 on screen1.
5 Download the application and firmware to the NQ-Series.
6 Open STEP 7-Micro/WIN.
7Click Communications in project window and click then on Communications ports.
To Next Page
Loading...
