Example application Section 4-3
39
Proceed as follows:
1 Click Multilingual Text ( ).
2 Draw the multilingual text object on Screen1.
3 Press the space bar. This will open a field in the Status Bar of NQ-
Designer. This will allow you to enter text immediately.
Figure 4.14: Multilingual text objects
4-3-4 Data entry objects
Data entry objects will use a keypad to change data. In the property box a
popup screen ( keypad screen is automatically assigned with respect to format
used). If the user wants to add a keypad to base screen to change an input,
the setting keypad should be set to NO in the numerical input configuration
Data entry objects are used to enter:
• numerical data
•bit data
The most important properties for numerical data are as follows:
• Tag Address (register)
• Tag Name
• Data Type (unsigned, hex, binary, etc.)
• Format (4,2) total 4 digit of which are 2 behind the delimiter (**,**)
The most important properties for bit data are as follows:
•Off Text
•On Text
•Keypad
To Next Page
Loading...
