Omron NQ HMI - Page 54

Example application Section 4-3
40
Proceed as follows:
1 Right-click on Screens folder in project panel.
2Click New Base Screen ( ).
3 Click on Screen2.
4Click Numerical Data Entry ( ).
Figure 4.15: Data entry objects
Note Right lower field shows explanation of field selected in property box.
4-3-5 Display data objects
Display data objects are used to display:
• numerical data
• message data
•bit data
The most important properties for numerical data are as follows:
• Tag Address
• Tag Name
• Data Type
The most important properties for message data are as follows:
• Ranges
•On Text
• Tag Address
• Colour/Flash/Visibility Animation
The most important properties for bit data are as follows:
•Off Text
•On Text
• Tag Address
• Colour/Flash/Visibility Animation