6-1 Operating Modes and System Menu
6-7
Refer to 2-9 Buttons in the Programming Manual for information on command buttons.
4. Storing 4002 in $SW0 (in System Memory)
A value of 4002 can be stored in $SW0 (in System Memory). Refer to 2-4 System Memory in
the NS Series Programming Manual for information on the system memory.
@ Selecting Menu Items
Items in the System Menu can be displayed by simply pressing the tab of the menu item to be
displayed.
Example: Press the Hardware Check Tab in the System Menu to display the Hardware
Check Screen.
@ Switching to RUN Status from the System Menu
Press the Exit Button to return to RUN mode.
Select the tab.
To Next Page
Loading...
Need help?
General
