Omron RX - Page 96

3-47
3-7 Parameter List
3
Operation
Control parameter
H001 Auto-tuning selection
00: Disabled
01: Not rotate
02: Rotate
00 No  4-109
H002
Motor parameter
selection
00: Standard motor parameter
01: Auto-tuning parameter
02: Auto-tuning parameter
(online auto-tuning enabled)
00
No 
4-109
4-111
4-113
H202
* 2nd motor
parameter selection
00
H003
Motor capacity
selection
0.20 to 160.0
Factory
default
No kW
4-19
4-109
4-113
4-116
H203
* 2nd motor capacity
selection
Factory
default
H004
Motor pole number
selection
2/4/6/8/10
4
No Pole
H204
* 2nd motor pole
number selection
4
H005 Speed response
0.001 to 9.999/10.00 to 80.00
(10.000 to 80.000)
1.590
Yes 
4-87
4-90
H205 * 2nd speed response 1.590
Parameter
No.
Function name Monitor or data range
Default
setting
Changes
during
operation
Unit Page
* 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001
to C008.