Omron RX - Page 98

3-49
3-7 Parameter List
3
Operation
Control parameter
H030
Motor parameter R1
(auto-tuning data)
0.001 to 9.999
10.00 to 65.53
Depends
on the
motor
capacity.
No 
4-109
4-113
H230
* 2nd motor
parameter R1
(auto-tuning data)
Depends
on the
motor
capacity.
H031
Motor parameter R2
(auto-tuning data)
0.001 to 9.999
10.00 to 65.53
Depends
on the
motor
capacity.
No 
H231
* 2nd motor
parameter R2
(auto-tuning data)
Depends
on the
motor
capacity.
H032
Motor parameter L
(auto-tuning data)
0.01 to 99.99
100.0 to 655.3
Depends
on the
motor
capacity.
No mH
H232
* 2nd motor
parameter L
(auto-tuning data)
Depends
on the
motor
capacity.
H033
Motor parameter Io
(auto-tuning data)
0.01 to 99.99
100.0 to 655.3
Depends
on the
motor
capacity.
No A
H233
* 2nd motor
parameter Io
(auto-tuning data)
Depends
on the
motor
capacity.
H034
Motor parameter J
(auto-tuning data)
0.001 to 9.999
10.00 to 99.99
100.0 to 999.9
1000. to 9999.
Depends
on the
motor
capacity.
No kgm
2
H234
* 2nd motor
parameter J
(auto-tuning data)
Depends
on the
motor
capacity.
Parameter
No.
Function name Monitor or data range
Default
setting
Changes
during
operation
Unit Page
* 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001
to C008.