Omron S8BA-24D24D120LF - Cleaning

5-3 Cleaning
5 Maintenance and inspection
S8BA-24D24D□□□LF
83
5
5-3 Cleaning
1. Cleaning the UPS
Moisten a soft cloth with water or detergent, squeeze it tightly, and wipe the product
lightly.
Do not use chemicals such as thinner and benzene. (They cause deformation or
discoloration.)
2. Removing dust from the input terminal block and the output terminal block terminal
blocks of the UPS
Stop all the connected devices and the UPS and turn the “input power supply” OFF.
Then, remove dust with a dry cloth and turn the “input power supply” ON again.
*For information on the connection procedure, see “3-2 Connection”.