Read and understand this manual
S8BA-24D24D□□□LF
Warranty conditions
The warranty conditions for the “OMRON product” are as follows:
・ Warranty period: For a period of 1 year from the date of purchase
(Unless otherwise described in “catalog or other documents”)
・ Warranty: Any of the following shall be performed on a faulty “OMRON product” at the discretion of
“OMRON”.
(a) In-warranty repair of a faulty “OMRON product” at an OMRON maintenance service center
(note that repair is not applicable to electromechanical components.)
(b) Supply of as many replacement products as the number of faulty “OMRON products” without
charge
・ Outside warranty: If the cause of the failure is any of the following, the failure shall be out of the
scope of warranty.
(a) Use other than the originally designed use of the “OMRON product”
(b) Use not compliant with the “application conditions”
(c) Use against “Notes when using the product” in this chapter
(d) Modification and/or repair not carried out by “OMRON”
(e) Software program introduced not by “OMRON”
(f) Anything that could not be predicted considering the level of science and/or technology at
the time of shipment from “OMRON”
(g) Cause besides the above not attributable to “OMRON” or “OMRON products” (including
force majeure such as disasters)
Limitations of liability
The warranty described in this chapter covers all the warranty related to the “OMRON product”.
“OMRON” and distributors of “OMRON products” shall not be responsible for any damage that occurs
and is related to “OMRON products”.
Export controls
To export or provide to non-residents of Japan “OMRON products” or their technical documents,
observe the laws and regulations of Japan and other related countries regarding security and export
controls. Should you violate any laws or regulations, “OMRON products” or their technical documents
may not be provided.
To Next Page
Loading...
Need help?
General
