Omron SYSMAC NX series Startup Guide

12
*3. For use of a 4-wire load cell, use a 4-conductor type; for use of a 6-wire load cell, use a
6-conductor type. In addition, the wire resistance should be less than 5 Ω.
The table below shows the software, used for explanation in this Guide, to install on the
personal computer (OS: Windows 7 64-bit edition).
Manufacturer
Name
Version
OMRON
Corporation
Sysmac Studio Version 1.16 or later

Omron SYSMAC NX series Specifications

General

Brand	Omron
Model	SYSMAC NX series
Category	Controller
Language	English