No.17S010-01
14/68
STC-MBS43U3V / STC-MCS43U3V / STC-MBS163U3V / STC-MCS163U3V
Product Specifications and Use’s Guide
Model Number STC-MBS163U3V STC-MCS163U3V
Auto Image
Control
Auto Exposure Support Support
Auto Gain Support Support
Auto White Balance N/A Support
Operational Mode
Edge preset Trigger / Pulse width Trigger / Start Stop Trigger / Free run
User Setting Storage Support
Communication Through USB3.0 bus
Interface USB3.0 Super speed (USB3.0 Micro B)
Protocol USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant
and Sentech’s original protocol (on Standard SDK, Trigger SDK)
Input / Output Three GPIOs, One Camera Hardware Reset
Power Input Voltage +5V (typ.) (This conforms to USB standard)
Consumption (*4) Max: 3.8 W, Typ: 3.4 W
Default: Bold
Aegis Electronic Group, Inc.
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
To Next Page
Loading...
