Omron USB3 Vision Series - Decimation (Only Available for STC-MBS163 U3 V; STC-MCS163 U3 V)

No.17S010-01
45/68
STC-MBS43U3V / STC-MCS43U3V / STC-MBS163U3V / STC-MCS163U3V
Product Specifications and Use’s Guide
9.4 Decimation (Only available for STC-MBS163U3V / STC-MCS163U3V)
When using Decimation mode, the decimated image can be output.
The images below show decimated pixels (red squares) where they are output.
GenICam Parameters
DecimationHorizontal Integer Type Sets decimation on horizontal direction
1: Disable Decimation, 2: Decimate one of two pixels
DecimationVertical Integer Type Sets decimation on vertical direction
1: Disable Decimation, 2: Decimate one of two pixels
(*) Binning and Decimation function cannot be use simultaneously.
Decimation X(Off), Y(Off)
Decimation X(Off),Y(On)
Decimation X(On),Y(Off) Decimation X(On),Y(On)
Decimation X(Off), Y(Off)
Decimation X(Off),Y(On)
Decimation X(On),Y(Off) Decimation X(On),Y(On)
Aegis Electronic Group, Inc.
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com