Omron V600 Series Operation Manual

3-4SectionCommand Types and Responses
43
3-4-7 Auto Command Processing Cancel (AA)
When in the response waiting condition, while auto command (auto read and
auto write) processing is being executed, it is possible to cancel this and restore
the command waiting condition.
Command Format
AA
Header
∗
For 1 to 1 procedure
AA
@ Unit No.
∗
FCS
Header
For 1 to N procedure
00 to 15
Response Format
AAXX
∗
Header
For 1 to 1 procedure
End code (see page 48)
14: Auto-command processing has not been executed.
75: Auto command processing has been cancelled.(DC
has not arrived.)
76: Processing is suspended and canceled during execu -
tion of auto command(auto write:some of DC data may
be rewritten)
AAXX
∗
@ Unit No.
FCS
For 1 to N procedure
Header
End code (see page 48)
00 to 15

Omron V600 Series Specifications

General

Operating Frequency	13.56 MHz
Supported Standards	ISO 15693, ISO 18000-3
Read Range	Up to 70 mm (depending on tag and environment)
Power Supply	24 VDC ±10%
Operating Temperature	-10 to 55°C (with no icing or condensation)
Humidity	35% to 85% (non-condensing)
Communication Interface	RS-232C