Omron V600 Series Operation Manual

4-6SectionReading Error Information (ERR)
74
Note Error data (up to 30 items) and error statistics are stored in the ID Controller
RAM. Data storage is supported by a maintenance-free back-up capacitor , and
data is preserved for approximately 20 days (at 25 ° C) after power to the ID Con -
troller is turned off.
4-6-2 Reading Error Statistics
Each time an error occurs, the ID Controller increments the subtotal for the given
type of error. MCBF figures are also calculated simultaneously, and up to 999
data items are stored in the designated memory area. The error statistics read
command enables supervision of error occurrence conditions, and therefore
makes
it possible to perform system operation condition diagnosis on a regular
basis.
Operation Procedure
2
INC
ERROR14
000000
S 0 10
INC
INC
PARITY E
S 0 170
COM,DC E
ERR
RESET
(2)
(1)
(4)
(5)
(6)
(3)
Error statistics
display symbol
Error code
Number of
error occurrences
S 605
RESET
(Cancel operation by pressing )
(Error mode selection menu)
Year Month Day
Head no.
1, 2, 3... 1. When the ERR Key is pressed, the error menu is shown on the display.
2. When Key 2 is pressed, the error statistics can be read. The
first time this
selection is made, the display is used to specify the data (year , month, day)
when statistics collection is about to start.

Omron V600 Series Specifications

General

Operating Frequency	13.56 MHz
Supported Standards	ISO 15693, ISO 18000-3
Read Range	Up to 70 mm (depending on tag and environment)
Power Supply	24 VDC ±10%
Operating Temperature	-10 to 55°C (with no icing or condensation)
Humidity	35% to 85% (non-condensing)
Communication Interface	RS-232C