RFID System
User's Manual
SECTION 7
Reference Data
SECTION 7
Appendices
145
V680-D1KP53M
Differences in Surrounding Metals(Reference)
communications ranges are affected by the type of metal in back of or surrounding the RF Tag, as
shown in the following table.
Mutual Interference with RF Tags (Reference)
To prevent malfunctioning due to mutual interference when using more than one RF Tag, leave
sufficient space between them as shown in the following diagram.
Steel SUS Brass Aluminum
V680-D1KP53M 100% 90% to 95% 90% to 95% 90% to 95%
Note: The value for steel around or behind the RF Tag is set to 100%.
To Next Page
Loading...
